Warm White, Neutral White or Cool White
60W
In die cast aluminium with back in V Style heat radiation and stream guidance design prevent the accumulation of dust which guarantee the heat radiation ability
Highly transparent 4mm/5mm toughened glass with airtight silicon gasket both on cover as well as body
Housing is finished in powder coated hammer tone grey, after pre-treatment, in thickness of minimum 50 microns
30 nos Cree SMD XTE with individual 70° * 140° lens for each Led with a minimum lumen output of 6750-7500 lm in cool white, neutral white & warm white
By means of pole of maximum diameter 65mm and the tilt of which can be adjusted from 0-10° when the streetlight is mounted vertically and -5° to 5° when the streetlight is mounted horizontally
140V-270V/50Hz power supply with 1 no Constant Current Led Driver of Philips 50W/1.2 Amp for 60W and 75W/1.5Amp for 75W. Led driver and pcb board is plug and play design which makes installation and maintenance convenient.Also installed is Philips series SPD with surge capacity of 10KV/10KA