Products

SLIM OVAL DESIGNER (INDIRECT) LUMINAIRES



 

Product Code:
SLIM OVAL DESIGNER
(INDIRECT) LUMINAIRES
4163 T26 236 I
4163 T26 236 I HF
4163 T5(T16) 228 I HF

 

 

GENERAL
Suitable for various indoor applications such as showroom, commercial places, offices, shopping areas & passages etc.

APPLICATION :
Suitable a suspended indirect light fitting.


TECHNICAL FEATURES ELECTRICAL ASSEMBLY

Housing:
In extruded aluminium oval section.

Accessories:
Accessories such as elbow, tee, dummy coupler etc. are fabricated from extruded aluminium slim oval section. Coupling of 2 light fittings possible by means of nipples.

Reflector:
Reflector fabricated from 0.3mm imported pre-anodised aluminium sheet of SATMA make grade 1175S in parabolic form. form.
 
Shielding: Cross louver in aluminium.

Finish: Housing is finished in broken white, or any colour of customer’s choice and louver in broken white after pre-treatment, in thickness of minimum 50 microns.

230V/240V/50Hz power supply, pushfit polycarbonate lamp holder in brass contact, polycarbonate starter holder, hard wire (0.5 sq.mm), PVC – heat resistant upto 90ºC. Suitable low watt loss Philips / Atco / Vossloh /Eurolite ballast, 3 way / 10A brass contact mains connector provided to facilitate connection from the mains.
Alternatively, Philips / Osram / Intelux /   HF electronic ballast can be used for all  versions by increasing the luminaire length.
Optionally the same fitting can be used with T5 (T16) lamps with Philips / Osram / Intelux /Eurolite HF electronic ballast.

Mounting:
Suspended by means of 1.6mm galvanised steel wire rope with adjustment of height from the ceiling upto 1 meter by means of brass nipples and double wire suspension kit.