Products

OVAL DESIGNER (DIRECT) LUMINAIRES



PRODUCT: CODE:
OVAL DESIGNER (DIRECT)LUMINAIRES 3709 T26 236 D
3709 T26 236 D HF
3709 T26 136 D
3709 T26 136 D HF


GENERAL:
Suitable for various indoor applications such as showroom, commercial places, offices, shopping areas & passages etc.

APPLICATION :
Suitable as a suspended direct light fitting.


TECHNICAL FEATURES ELECTRICAL ASSEMBLY

HOUSING: In extruded aluminium section.

REFLECTOR: Reflector fabricated from 0.3mm imported pre-anodised aluminium sheet of  SATMA make grade 1175S in parabolic form..

ACCESSORIES: Elbow, tee, 3way, 4 way, dummy coupler fabricated from extruded aluminium oval section. Coupling of 2 light fittings possible by means of nipples.

SHIELDING: Cross louver in aluminium.

FINISH: Housing is finished in broken white or any colour of customer choice and louver in broken white louver in broken white after pre-treatment, in thickness of minimum 50 microns.

230V/240V/50Hz power supply, pushfit polycarbonate lamp holder in brass contact, polycarbonate starter holder, hard wire (0.5 sq.mm), PVC – heat resistant upto 90ºC. Suitable low watt loss Philips / Atco / Vossloh /Eurolite ballast, 3 way / 10A brass contact mains connector provided to facilitate connection from the mains. Alternatively, Philips / Osram / Intelux /Eurolite HF electronic ballast  can be used for all  versions by increasing the luminaire length. Optionally the same fitting can be used with T5 (T16) lamps with Philips / Osram / Intelux /Eurolite HF electronic ballast.

MOUNTING:
Surface mounted or suspended by means of 1.6mm galvanised steel wire rope with adjustment of height from the ceiling upto 1 meter by means of brass nipples.