Products

SLIM OVAL DESIGNER (DIRECT) LUMINAIRES



PRODUCT: CODE:
SLIM OVAL DESIGNER (DIRECT) LUMINAIRES 4163 T26 136 D
4163 T26 136 D HF
4163 T26 236 D
4163 T26 236 D HF
4163 T5(T16) 228 D HF

GENERAL:
Suitable for various indoor applications such as showroom, commercial places, offices, shopping areas & passages etc.

APPLICATION :
Suitable as a surface or suspended direct light fitting


TECHNICAL FEATURES ELECTRICAL ASSEMBLY

HOUSING:
In extruded aluminium oval section.

ACCESSORIES:
Accessories such as elbow, tee, dummy coupler etc. are fabricated from extruded aluminium slim oval section. Coupling of 2 light fittings possible by means of nipples.

REFLECTOR:
Reflector fabricated from 0.3mm imported pre-anodised aluminium sheet of  SATMA make grade 1175S in parabolic form. form.
 
SHIELDING: Cross louver in aluminium.

FINISH: Housing is finished in broken white, or any colour of customer’s choice and louver in broken white after pre-treatment, in thickness of minimum 50 microns.

230V/240V/50Hz power supply, pushfit polycarbonate lamp holder in brass contact, polycarbonate starter holder, hard wire (0.5 sq.mm), PVC – heat resistant upto 90ºC. Suitable low watt loss Philips / Atco / Vossloh /Eurolite ballast, 3 way / 10A brass contact mains connector provided to facilitate connection from the mains. Alternatively, Philips / Osram / Intelux /Eurolite HF electronic ballast  can be used for all  versions by increasing the luminaire length. Optionally the same fitting can be used with T5 (T16) lamps with Philips / Osram / Intelux /Eurolite HF electronic ballast.

MOUNTING:
Surface mounted or suspended by means of 1.6mm galvanised steel wire rope with adjustment of height from the ceiling upto 1 meter by means of brass nipples.