Products

265MM DOWNLIGHT FOR DOUBLE ENDED CDM-TD 70W/150W METAL HALIDE LAMP



PRODUCT: CODE:
265MM Ø DOWNLIGHT FOR DOUBLE ENDED CDM-TD 70W/150W METAL HALIDE LAMP DL CDM-TD 70 01 265
DL CDM-TD 150 01 265


GENERAL:
Suitable for various indoor applications such as showroom, commercial places, offices, shopping areas etc.

APPLICATION :
Suitable for Armstrong / Luxalon / Gypsum board / POP ceiling.


TECHNICAL FEATURES ELECTRICAL ASSEMBLY

RING & BRACKETRing moulded in ABS plastic in broken white or silver finish.

HOUSING & CONTROL GEARHousing is deep drawn from sheet steel CRCA and control gear fabricated from sheet steel CRCA.

REFLECTOR:  Low iridescent high quality mirror bright or matt parabolic reflector fabricated from 99.8% purity aluminium.

SHIELDING: Shielding in the form of toughened glass of 4mm thickness.

FINISH:  Housing & control gear are powder coated in broken white finish after pretreatment in thickness of minimum 50 microns.

230 V/ 240V/ 50 Hz power supply, lamp holder RX7s base suitable for 70W / 150 W CDM-TD metal halide lamp in electrolytic copper&silver contact, hard wire (1.0 sq mm.), PVC - heat resistant upto 90ºC. Separate control gear box, incorporating low watt loss Philips/Osram /Eurolite IBU connected to the housing by means of corrugated pipe and left loose on the ceiling. 3 way / 10A connector provided to facilitate connection from the mains. Alternately Philips/Osram HF electronic ballast can be used.