|120 MM CIRCULAR DESIGNER (DIRECT) LUMINAIRES||
4628 T26 136 D
4628 T26 136 D HF
4628 T26 236 D
4628 T26 236 D HF
4628 T5(T16) 254 D HF
Suitable for various indoor applications such as showroom, commercial places, offices, shopping areas & passages etc.
Suitable for Armstrong / Luxalon / Gypsum board / POP ceiling.
Cat. 2 as per LG3
In extruded aluminium section.
Elbow, tee, 3way, 4 way, dummy coupler fabricated from extruded aluminium section.
Reflector fabricated from 0.3mm imported pre-anodised aluminium sheet of SATMA make grade 1175S in parabolic form..
Moulded from impact resistant ABS plastic in double parabolic form in silver finish with glare control in transversal plane.
Housing is finished in broken white or any colour of customer’s choice, after pre-treatment, in thickness of minimum 50 microns.
230V/240V/50Hz power supply, pushfit polycarbonate lamp holder in brass contact, polycarbonate starter holder, hard wire (0.5 sq.mm), PVC – heat resistant upto 90ºC. Suitable low watt loss Philips / Atco / Vossloh /Eurolite ballast, 3 way / 10A brass contact mains connector provided to facilitate connection from the mains. Alternatively, Philips / Osram / Intelux /Eurolite HF electronic ballast can be used for all versions keeping the luminaire length unchanged. Optionally the same fitting can be used with T5 (T16) lamps with Philips / Osram / Intelux /Eurolite HF electronic ballast.
Surface mounted or suspended by means of 1.6mm galvanised steel wire rope with adjustment of height from the ceiling upto 1 meter by means of brass nipples.