|SLIM OVAL DESIGNER (DIRECT) LUMINAIRES||
4163 T26 136 D
4163 T26 136 D HF
4163 T26 236 D
4163 T26 236 D HF
4163 T5(T16) 228 D HF
Suitable for various indoor applications such as showroom, commercial places, offices, shopping areas & passages etc.
Suitable as a surface or suspended direct light fitting
In extruded aluminium oval section.
Accessories such as elbow, tee, dummy coupler etc. are fabricated from extruded aluminium slim oval section. Coupling of 2 light fittings possible by means of nipples.
Reflector fabricated from 0.3mm imported pre-anodised aluminium sheet of SATMA make grade 1175S in parabolic form. form.
SHIELDING: Cross louver in aluminium.
FINISH: Housing is finished in broken white, or any colour of customer’s choice and louver in broken white after pre-treatment, in thickness of minimum 50 microns.
230V/240V/50Hz power supply, pushfit polycarbonate lamp holder in brass contact, polycarbonate starter holder, hard wire (0.5 sq.mm), PVC – heat resistant upto 90ºC. Suitable low watt loss Philips / Atco / Vossloh /Eurolite ballast, 3 way / 10A brass contact mains connector provided to facilitate connection from the mains. Alternatively, Philips / Osram / Intelux /Eurolite HF electronic ballast can be used for all versions by increasing the luminaire length. Optionally the same fitting can be used with T5 (T16) lamps with Philips / Osram / Intelux /Eurolite HF electronic ballast.
Surface mounted or suspended by means of 1.6mm galvanised steel wire rope with adjustment of height from the ceiling upto 1 meter by means of brass nipples.